2018 Case IH Steiger® Series Steiger® 620 Quadtrac

MoreLess
Limited Time Offer!

Selling Price -$335,000.00

2018 Case IH Steiger® Series Steiger® 620 Quadtrac

The Steiger® 620, with industry leading peak 680 horsepower and a 12.9 L Tier 4 B/Final engine, can handle the largest implements and toughest conditions. Available configurations: HD Wheeled, Quadtrac® and HD Wheeled Scraper.

  • 2018
  • Case IH
  • Steiger® Series
  • Steiger® 620 Quadtrac
  • 4WD
  • 12.9 L, Two-Stage Turbo
  • Case IH FPT
  • Advertised: 620 HP (462 kW) | Maximum: 682 HP (509 kW) | Power Boost: 62 HP (46 kW)
  • 2100 rpm
  • Two-Stage Turbocharged, Inter- & Aftercooled
  • Hydraulic fan drive
  • Tier 4B / Final | Cleanup Catalyst (CUC): standard | Diesel Oxidation Catalyst (DOC): standard
  • Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF): SCR w/ DEF | Exhaust Pipe: Vertical stack
  • Quantity: 6
  • 787 in³ (12.9 L)
  • 5.31 in (135 mm)
  • 5.91 in (150 mm)
  • PowerDrive, Full powershift | Speeds: 16F / 2R
  • Independent
  • 1000 rpm
  • Planetary & Planetary Drop Gear
  • Configuration: Frame Articulated
  • High Pressure Common Rail | Control: Electronic
  • Direct
  • Service: Wet disc
  • 30 or 36 (762 or 914) Rubber Track
  • 30 or 36 (762 or 914) Rubber Track
  • 4 Tracks
  • Rated: 240 Amps
  • System Rating: 12 V System; 24 V Start
  • 25 mph (40 kph)
  • Pressure Flow Compensated | Standard Remote Valves Quantity: 4 std
  • Single pump std
  • Implement Pump: 42 gpm (159 lpm)
  • Axle Output End: Flange | Drawbar: Category 4
  • 3-Point Hitch Category: Category 4N Quick Coupler | Draft Link Ends Telescopic: Quick Coupler
  • 118 to 124 in (2997 to 3150 mm)
  • No bar axle
  • 154 in (3912 mm)
  • 470 gal (1779 L)
  • 24 in behind pin: 19,728 lbs (8949 kg)
  • DEF: 85 gal (322 L)
  • Total allowable, w/maximum ballast: 64,000 lbs (29030 kg)
  • 53,503 lbs (24629Kg)
  • Block Design, Replaceable Liners: Wet liners | Shuttle (Forward-Reverse): Yes
  • 3-Point Hitch: Three Position, Lift, Hold, Lower
  • Powershift
  • 4WD
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $335,000.00
  • Twin Falls
  • Pre-Owned
  • UAG68F
  • 2018
  • Case IH
  • Steiger® Series Steiger® 620 Quadtrac
  • ZJF315068
  • 12.9 L, Two-Stage Turbo
  • 620
  • 3232
  • Axle Output End: Flange | Drawbar: Category 4
  • PowerDrive, Full powershift | Speeds: 16F / 2R
  • Diesel
  • Available
  • Powershift
  • 4WD
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.